Suitable for up to 100 plus uses per day
  • Dry time (in-house tested): 21 Seconds (on max power)
  • Cost per 1000 dries: 31p - 67p (95.6 - 98% saving against paper towels)
  • Guarantee: 2 Years
  • Rated Power: 0.4 kW - 0.95 kW | 2.56 - 5.54 Wh per dry (Internal on / off heater switch)
  • One of the most compact hand dryers with a depth of just 10cm
  • Extremely well constructed and elegant appearance
  • Thin blade style air outlet gives fast dry times
Brushed Satin
€215,93 inc. VAT

  • In Stock
  • Est delivery 1-2 days
  • 2 Year Guarantee

Performance Rating

  • 4.0 out of 5
    Energy Consumption

    This rating is based on the watt hours per dry of the hand dryer which is derived from the rated power and the time taken to dry the hands. We have used the figures based on either the manufacturer’s dry time, if yet to be in house tested or based on the in house testing dry time we have conducted. This will also be based on the most energy efficient setting, if the hand dryer is adjustable for speed and/or heat.

    Watt hours per dry:

    • 0 – 1.99Wh = star rating 5
    • 2 – 2.99Wh = star rating 4.5
    • 3 – 3.99Wh = star rating 4
    • 4 – 4.99Wh = star rating 3.5
    • 5 – 5.99Wh = star rating 3
    • 6 – 6.99Wh = star rating 2.5
    • 7 – 7.99Wh = star rating 2
    • 8 – 8.99Wh = star rating 1.5
    • 9 – 9.99Wh = star rating 1
    • 10Wh and above = star rating 0.5
  • 4.5 out of 5
    Quiet Sound Level

    This rating is based on the manufacturers stated sound level, usually at 1m. Please see the section titled "how quiet is the." for more information and independent test results, which give a more accurate noise decibel level. These ratings will also be based on the low noise setting, if the hand dryer is adjustable for speed. Therefore at full speed the hand dryer may not be quiet, however it may be adjustable to become quiet if this is required.

  • 0.5 out of 5
    Life Expectancy

    This rating is based on the number of motor life cycles (number of uses) the hand dryer, in theory, will last for. This is based on the motor life expectancy given to us in hours, from the manufacturer.

    The number of cycles (uses) has been calculated as follows:

    (Number of seconds in the hour / seconds per dry) x motor life hours

    For a more individualised longevity calculation based on your own usage numbers please use the life expectancy calculator on each product page.

    Number of motor life cycles:

    • 1,000,000 and over = star rating 5
    • 800,000 – 999,999 = star rating 4.5
    • 600,000 – 799,999 = star rating 4
    • 400,000 – 599,999 = star rating 3.5
    • 200,000 – 399,999 = star rating 3
    • 100,000 – 199,999 = star rating 2.5
    • 80,000 – 99,999 = star rating 2
    • 60,000 – 79,999 = star rating 1.5
    • 40,000 – 59,999 = star rating 1
    • 39,999 and under = star rating 0.5
  • 3.0 out of 5
    High Speed

    These ratings are based on the in house testing we have conducted regarding dry times. They show realistic comparisons of what to expect from each hand dryer. Please note that the manufacturer stated dry time is not always accurate when compared to the hand dryer being used in realistic conditions. The ratings are based on the hand dryer being placed at its high speed setting if it can be manually adjusted.

    Dry Speed (seconds):

    • 10 – 11 seconds = star rating 5
    • 12 – 13 seconds = star rating 4.5
    • 14 – 15 seconds = star rating 4
    • 16 – 17 seconds = star rating 3.5
    • 18 – 19 seconds = star rating 3
    • 20 – 21 seconds = star rating 2.5
    • 22 – 23 seconds = star rating 2
    • 24 – 25 seconds = star rating 1.5
    • 26 – 27 seconds = star rating 1
    • Over 28 seconds = star rating 0.5
  • 5.0 out of 5
    Vandal Resistance

    Some hand dryers would not be suitable for some locations where abuse may be likely such as a train station or night club. However the same hand dryer would be suitable for an office or school location. These ratings are based on an added together scoring system where the higher the rating, the more suitable we would recommend for areas where abuse may be likely.

    Vandal Resistance score

    • Compact size = score 0.5              
    • Decreased blockage potential = score 0.5
    • Additional Backplate/ fixings strength = score 1
    • Anti-vandal extras = score 1
    • Metal / ABS = score 1    
    • Cover thickness 1.5mm or more = score 0.5        
    • No leverage points (design) = score 0.5


When the washroom has a contemporary décor but is restricted on space, the Dryflow® EcoWave hand dryer stands out as a low energy solution. With a depth of just 10cm, this adjustable hand dryer displays an elegant ripple-shape profile. DFEW02 has the ability to be run at only 400W, though for user's comfort during colder months the heating element can be activated only increasing the overall rated power to 950W. Besides its great energy efficiency, the stainless steel case, secured by 4 security screws, prevents vandalism and ensures durability. It also has a solid steel backplate. In house testing shows respectable dry times between 20-25 seconds thanks to its air flow of up to 179MPH, yet maintains a low noise level of 70 dB(A). All considered, we would advise to choose this automatic hand dryer for light traffic locations with less than 100 uses a day, such as offices.

A thin, blade style air outlet allows full coverage of both hands when drying, maximising the dry time. The airflow passes through a filter that can easy be removed to clean, enhancing the life of the product.  An internal switch allows you to turn off the heater element allowing you to customise the energy efficiency.  In low use washrooms which do not get constant use, the airflow can appear cold on first use, as is the case with all modern high speed hand dryers where residual heat from the motor is recycled to create heat.  The choice of having instant heat is a real bonus in an occasionally used bathroom.

The Dryflow eco is a stylish looking hand dryer that will give years of use at low traffic washrooms.  Quiet in operation yet fast to dry, this slimline energy efficient model is suitable for the smallest of areas and packs in some great features.

Technical Description

Solid stainless steel case available in a brushed stain finish. A brushed motor produces 22,000RPM creating a 179MPH airflow. Depth is 100mm. In house testing shows dry times of 20-25 seconds. The energy consumption of the motor is 400kW. The heater element consumes 0.55kW giving a total output of 0.95kw. The heater element can be switched off via an internal switch. The sound level is stated by the manufacturer to be 70db at 1m from the hand dryer.  A filter is included to purify the air before it is blown onto the hands. 

...Read more less

Applications:low use (less than 100 uses per day), low use (less than 100 uses per day)

  • Dry time (in-house tested): 21 - 23 Seconds (dependent upon settings used)
  • Cost per 1000 dries: 31p - 67p (95.6 - 98% saving against paper towels)
  • Guarantee: 2 Years
  • Rated Power: 0.4 kW - 0.95 kW | 2.56 - 5.54 Wh per dry (Internal on / off heater switch)
  • One of the most compact hand dryers with a depth of just 10cm
  • Extremely well constructed and elegant appearance - stainless steel back plate and vandal resistant cover, secured by 4 security screws
  • Thin blade style air outlet gives fast dry times
  • An internal switch allows you to turn off the heater element and run the unit at just 400W
  • Touch free operation reduces the risk of spreading germs
  • Dimensions: 300 (H) x 275 (W) x 100 (D) mm
  • IPX1
What does renting a hand dryer involve?

When you rent a hand dryer, we will provide the installation, on-site breakdown cover and a yearly service check. The rental contract would be over a minimum 3 year contract (usually 5 years) and paid for by monthly direct debit.

All quotes are subject to a credit check and typically 3-6 months payment will be taken in advance to cover the install. We can only quote (without a site visit) if you have existing electrical spur points in place.

The hand dryer remains the property of 'Intelligent Facility Solutions Ltd' after the rental period and may either be extended, removed or purchased for a much reduced fee.

Does it actually do what the manufacturer states? Independent testing information

At Intelligent Hand Dryers UK, our ethos is to bring you as much open, honest and reliable information as possible so you can make the most suitable and informed purchase.

We endeavour to include independently obtained results and in house testing, as well as manufacturer's specifications. This gives a true reflection of dry time performance, noise and energy efficiency of each hand dryer.

Noise level testing was conducted at the Building Research Establishment (BRE) and a leading independent testing facility.

We also provide in house video testing to demonstrate dry performance. This gives a visual demonstration in “real use” as opposed to using methodical scientific protocols.  The approximate dry time using this method was set when no spots of water could be seen on a paper towel after drying the hands.  This is over and above what is required to be classed as a “hygienic dry” which requires 95% of the hands to be dry after using the dryer.

Need more information or advice? Please contact us by clicking here where one of our dedicated experts will be able to assist you in whichever way you need.

Fast, quiet, hygienic and energy efficient hand dryers – do they exist?

We ask, is it possible to get a balance between speed and noise in a hand dryer that satisfies the user. Of course faster airflow and particularly fast, condensed airflow is going to create more noise, so it’s a real challenge to hand dryer designers and engineers to create a dryer that people are happy with the performance, the noise levels and the energy efficiency,

Blade hand dryers

The Mitsubishi Jet towel is an example of a product that nearly meets this objective. Our independent results* measured the Mitsubishi Jet Towel at 75 dB(A) in a anechoic chamber (sound proof room) with hands placed into the airflow for a realistic noise measurement. 75 dB(A) is considerably higher than the 58 to 64 dB(A) advertised for the Mitsubishi Jet Towel however the generation 8 model dries relatively quickly (around 16 seconds in stringent test conditions, less in normal circumstances) and it uses as little as 0.55kw rated power. 75 dB(A) on a scale using deafening, very loud, loud, moderate, faint and very faint to describe would be on the lower end of loud, very few people would be expected to be irritated by this level.

It must be noted though that this measurement did not take into account noise amplification in a normal room, a previous study at Intertek revealed the Mitsubishi Jet Towel hand dryer measured at 79 dB(A) in a representative room. Upper 70’s in dB(A) are considered to irritate a small minority of people but with a hand dryer it is a very short lived experience, certainly in terms of safety, 80 dB(A) is considered safe for up to 8 hours exposure per day so there is no issue from this perspective. A little more detail about pitch is needed to complete the overview of the perceived sound on hand dryers but from this basic information the Mitsubishi Jet Towel achieves a good balance.

From a hygiene perspective, it has NSF approvals, although these kinds of approvals are done based on testing on brand new hand dryers. What is important is how hygienic the hand dryer will be 2 years after installing. The nature of this hand dryer with its water collection means that it must have a thorough and regular cleaning routine to maintain optimum hygiene standards.

The information we have on the new ‘quieter’ Dyson Airblade DB is incomplete, we only have a measurement in the sound proof chamber at 80 dB(A). You would expect a 4-5 dB(A) amplification in a normal room, if it followed the same pattern as the Mitsubishi Jet Towel and other dryers. Again, there is no safety issue at these levels considering the short term exposure but some users will certainly find these noise levels irritating. The Dyson Airblade DB is certainly fast drying (13-14 seconds in our stringent test and less than this under normal conditions) and uses an acceptable if not low rate power of 1.6kw. We have to say, based on the evidence, if you are looking for a good balance between energy efficiency, speed and noise the Mitsubishi is the overall winner here. With regards to hygiene, the same applies as with the Mitsubishi Jet Towel, all testing is based on a brand new unit, although the Airblade does not collect water if the HEPA filter is not properly maintained and cleaned there will surely be a difference between the hygiene levels provided by a new unit and one two years into its life.

‘Hands under’ type hand dryers.

The Dryflow Classic PLUS and Dryflow Elite are two dryers that are designed specifically to meet the objective of achieving an acceptable performance, at a quiet sound level with reasonable levels of energy efficiency. Another positive is that they are both very affordable hand dryers with outstanding motor lifespans. The Dryflow Classic PLUS is not a super-fast dryer but it is solid, it combines 45 m/s air speeds (traditional dryers 20-30 m/s, high speed 70 m/s upwards) with heat to achieve an approximate 20 second dry. The independent test measured the dB(A) at 72 in a sound proof chamber with hands under and because the Dryflow Classic PLUS is not relying purely on rapid airspeed we would expect amplification in a normal room to be minimal. We would describe this hand dryer as an excellent compromise, reasonable fast if not spectacular, with a very tolerable noise level with a rated power of just 1.35kw giving an energy efficient, if not hyper low energy performance. The Dryflow Classic PLUS is vandal resistant, very long lasting and at a price point where it is affordable for all. I guess the only question mark is that mild heat, in theory will increase bacteria levels if the dryer is not internally sanitized, we don’t have any clear evidence of this put this is the argument that has been pu forward by the paper towel companies for many years.

The eXtremeAir CPC hand dryer

The eXtremeAir CPC is a new innovation in the hand dryer market, this product contains a Cold Plasma generator that effectively creates a reaction from the moisture on the hands and in the air to form hydroxyl radicals that break down the molecular structure of bacteria and small viruses present on the hands, in the immediate surrounding air and surfaces. The eXtremeAir CPC has a completely adjustable motor and heat settings hence why it is included in this discussion.

On maximum speed the dryer tested at a relatively high 86 dB(A) with hands in the airflow, however it reduced to just 73 dB(A) on the lower setting. It is worth noting that at the lower dB (A) level it still had a motor speed of 14,000 rpm and airflow comparable, if not a little faster with the Dryflow Classic PLUS, so with this hand dryer you can find the balance to suit. The eXtremeAir CPC uses as little as 0.3kw on minimum motor speed and only 0.5kw on high motor speed. When you need it to be quieter, you can reduce the motor speed down and add heat. The issue of heat creating bacteria is negated by the cold plasma. Cold plasma is also self-sanitising in the sense that it continuously sanitises the surface of the hands, surrounding surfaces and inside the dryer, so we can say with assurance that the product remains as hygienic 5 years into its life as when it was first tested.

The eXtremeAir CPC is a genuine breakthrough in the market and we believe can be evidenced as the best current solution that can be described as potentially quiet, very hygienic (more so than any other method of drying in fact), very fast and energy efficient. It is also guaranteed for 6 years and highly vandal resistant so we think ticks all the boxes.

For more information on any of the hand dryers discussed please view the website or call +44 (0)114 3540047

What is the Best Hand Dryer Option for Schools?

Intelligent Hand Dryers UK has written on this subject many times; however we now categorically have the answer.

The eXtremeAir CPC, is available at discounted price to the public sector to make it a comparable price with the other high quality fast and energy efficient hand dryers we offer, but it is not just a hand dryer, it is a passive and hugely effective way of reducing cross infection of pupils, teachers and family members.

Schools are an absolute hotbed for cross infection because a) Kids do not tend to wash their hands as thoroughly as they might, this is true of us all actually, b) School Children change rooms and move all over the building throughout the day and share equipment and c) there are a large number of people in close proximity and physical contact is frequent.

The eXtremeAir satisfies all the current criteria of being highly energy efficient, quick drying, vandal resistant and accessible for Children of different heights but also incorporates Cold Plasma Clean Technology to break down the molecular structure of viruses and bacteria on the surfaces of the hands.

This is not to be confused with the hand dryers we offer that trap 99.9% of bacteria over a 0.3 microns using a HEPA filter, the eXtremeAir is not only sanitizing the air, it is much more importantly sanitizing the hands every time they are dried. In terms of inflectional control cleaning the air that dries the hands may stop extra bacteria forming on the hands but it does nothing to tackle it.

The eXtemeAir CPC hand dryer therefore offers a passive way of improving hand hygiene throughout schools. We say passive’ because pupils don’t need to be educated to use it, hand dryers are already part of their cycle unlike using a sanitizer and there is no consumable to change.
It can even be used as an educational tool as wall plates are available that explain the technology

Another important feature of the eXtremeAir CPC is that it remains hygienic and energy efficient even when heat is used. If you use heat evaporation in normal circumstances it is not considered to be as hygienic but Cold Plasma Clean technology eliminates that as a problem. This in turn allows the motor speed to be reduced where quiet is needed i.e near classrooms, Assembly Halls, Libraries etc and warm air to be added. The eXtremeAir CPC then remains effective yet quiet (70% quieter than the new ‘50% quieter Airblade’ and Airforce, 130% quieter than the new Xlerator 500)

Click here to download the White Paper and learn more about Cold Plasma technology and the independent testing that has been carried out or call 0114 3540047 for more information.

Energy ConsumptionElectrical Supply Voltage220-240 Volts
Electrical Supply Frequency50-60 Hz
PerformanceExpected Motor Life400 Hours
Dry Time (max setting)21 Seconds
Dry Time (min setting)23 Seconds
Dry Time NotesIn house testing dry time
Universal Brush Motor
Motor Speed (max setting)22,000 RPM
Air Speed (max setting)179 MPH
Operating Temperature Range0-40 °C
Heater Element Power550 Watts
Motor Cutoff Time60 Seconds
Motor ClassClass I
Rated PowerRated Power (max settings)950 Watts
Rated Power (min settings)400 Watts
Energy Per Dry (max setting)5.54 Watt-hours (Wh)
Energy Per Dry (min setting)2.56 Watt-hours (Wh)
Energy Per Dry NotesBased on in house tested dry times
NoiseOperating Sound Level (max setting)70 dB
SensorSensor typeInfrared (12+-3 cm range)
Guarantee2 Years
ConstructionMaterialsStainless steel
Net Weight4.5 kg
Packed Weight5.5 kg
FinishesBrushed Stainless Steel
Electrical & SafetyIP ratingIPX1
DimensionsProduct Height300 mm
Product Width275 mm
Product Depth100 mm
Packaging Height373 mm
Packaging Width308 mm
Packaging Depth128 mm
Mounting InstructionsMen1170 mm
Women1120 mm
Children 4-7 Years810 mm
Children 7-10 Years910 mm
Children 10-13 Years1020 mm
Children 13-17 Years1120 mm
Disabled940 mm
Replaceable FeaturesGeneral FIlter
Print these specifications