• Operation: Battery or Mains supply (4 X 1.5 AA batteries or 220-240V power adapter included)
  • Flow rate at 3 bar: 5.7 lpm
  • Guarantee: 2 years
  • Type of water mixing: Cold or premixed
  • Connector: 1/2"
  • Mounting: Deck mounted - hole Ø 25-30mm
  • Minimum/Maximum flow pressure: 0.5bar / 8bar
  • Supplied with aerator/flow control
  • Dimensions: Ø60mm x D230mm (208mm spout projection)
  • Part of the Dryflow Tri-Tap series (soap, water and hand dryer all over the sink)
WALL mounted (Tri-Tap Water Sensor Tap)
DECK mounted (Bi-Tap Soap & Water Sensor Tap)
€354,00
€424,80 inc. VAT

  • In Stock
  • Est delivery 3 weeks
  • 2 Year Guarantee

Description

This product can be used as a stand-alone item but also forms part of the Dryflow Tri-Tap series which includes an over the sink hand dryer and automatic soap dispenser. The full set can be purchased in one go by clicking here. There’s also a 2-product series available in this range as a deck mounted option. The elegant Dryflow Tri-Tap Water Sensor Tap is WRAS approved and provides a low flow rate of 5.7lpm which is enhanced by the inclusion of an aerator and flow control. This chrome finished, high quality brass tap can provide both cold or premixed warm water. It is suitable for a range of differing washrooms as it can withstand water pressures between 0.5 and 8bar.

This product is available in a DECK mounted Bi-Tap or WALL mounted Tri-Tap option.

Matching products in the Tri-Tap series

Purchase the full set by clicking here

When combined with the Dryflow Tri-Tap hand dryer and automatic soap dispenser, every part of the hand washing experience can be made effortlessly over the sink. A high-quality, robust product that we would recommend for mid to high traffic areas (300-500 uses per day).

The unit comes equipped with the ability to choose the power supply with it using either battery operation or via the mains. The sensor operation allows everything to be touch free, preventing cross contamination and a much more efficient use of water.

The Water Supply (Water Fittings) Regulations or Scottish Byelaws require that a water fitting should not cause waste, misuse, undue consumption or contamination of the water supply and must be ‘of an appropriate quality and standard. This product demonstrates this by being WRAS approved.

Technical description

Dryflow Tri-Tap Water Sensor Tap is a WRAS approved, wall mounted, infra-red brass tap with polished chrome finish. Battery operated using 4 X 1.5 AA batteries or mains supplied using the included 220-240V power adapter. Recommended minimum cold or premixed warm water pressure is 0.5 - 8 bar. A 3 bar pressure gives a flow rate of 5.7lpm. A connector size of 1/2” is required. The full Dryflow Tri-Tap series includes a wall mounted hand dryer, water sensor tap and automatic soap dispenser for a complete over the sink wash and dry experience.

Purchase the full set by clicking here

...Read more less

Applications:Airports, Bars, Cinema/Theatre, Heavy use (301 to 500 uses per day), Hotel, Motorway Services, Office, Public Attractions, Restaurant, Retail Outlet, Sports Stadium


  • Operation: Battery or Mains supply (4 X 1.5 AA batteries or 220-240V power adapter included)
  • Flow rate at 3 bar: 5.7 lpm
  • Guarantee: 2 years
  • Type of water mixing: Cold or premixed
  • Connector: 1/2"
  • Mounting: Deck mounted - hole Ø 25-30mm
  • Minimum/Maximum flow pressure: 0.5bar / 8bar
  • Supplied with aerator/flow control
  • Dimensions: Ø60mm x D230mm (208mm spout projection)
  • Part of the Dryflow Tri-Tap series (soap, water and hand dryer all over the sink)
  • WRAS approved
  • Chrome finish - tap made from high quality brass
Energy ConsumptionElectrical Supply Voltage220-240 Volts
Electrical Supply Frequency50/60 Hz
SensorSensor typeIR
Guarantee2 Years
ConstructionMaterialsChrome plated brass
FinishesPolished Chrome
DimensionsProduct HeightØ60 mm
Product WidthØ60 mm
Product Depth230mm | Spout projection: 208 mm
CertificationCE
ROHS
OtherTUV-GS, WRAS
Print these specifications