Performance Rating
-
Energy Consumption4.5 out of 5
This rating is based on the watts per dry of the hand dryer which is derived from the rated power and the time taken to dry the hands. We have used the figures based on either the manufacturer’s dry time, if yet to be in house tested or based on the in house testing dry time we have conducted. This will also be based on the most energy efficient setting, if the hand dryer is adjustable for speed and/or heat.
Watts per dry:
- 0 – 1.99W = star rating 5
- 2 – 2.99W = star rating 4.5
- 3 – 3.99W = star rating 4
- 4 – 4.99W = star rating 3.5
- 5 – 5.99W = star rating 3
- 6 – 6.99W = star rating 2.5
- 7 – 7.99W = star rating 2
- 8 – 8.99W = star rating 1.5
- 9 – 9.99W = star rating 1
- 10W and above = star rating 0.5
-
Quiet Sound Level4.5 out of 5
This rating is based on the manufacturers stated sound level, usually at 1m. Please see the section titled "how quiet is the." for more information and independent test results, which give a more accurate noise decibel level. These ratings will also be based on the low noise setting, if the hand dryer is adjustable for speed. Therefore at full speed the hand dryer may not be quiet, however it may be adjustable to become quiet if this is required.
Decibels (dB):
- Up to 68dB = star rating 5
- 69 – 70dB = star rating 4.5
- 71 – 72dB = star rating 4
- 73 – 74dB = star rating 3.5
- 75 – 76dB = star rating 3
- 77 – 78dB = star rating 2.5
- 79 – 80dB = star rating 2
- 81 – 82dB = star rating 1.5
- 83 – 84dB = star rating 1
-
Life Expectancy5.0 out of 5
This rating is based on the number of motor life cycles (number of uses) the hand dryer, in theory, will last for. This is based on the motor life expectancy given to us in hours, from the manufacturer.
The number of cycles (uses) has been calculated as follows:
(Number of seconds in the hour / seconds per dry) x motor life hours
For a more individualised longevity calculation based on your own usage numbers please use the life expectancy calculator on each product page.
Number of motor life cycles:
- 1,000,000 and over = star rating 5
- 800,000 – 999,999 = star rating 4.5
- 600,000 – 799,999 = star rating 4
- 400,000 – 599,999 = star rating 3.5
- 200,000 – 399,999 = star rating 3
- 100,000 – 199,999 = star rating 2.5
- 80,000 – 99,999 = star rating 2
- 60,000 – 79,999 = star rating 1.5
- 40,000 – 59,999 = star rating 1
- 39,999 and under = star rating 0.5
-
High Speed5.0 out of 5
These ratings are based on the in house testing we have conducted regarding dry times. They show realistic comparisons of what to expect from each hand dryer. Please note that the manufacturer stated dry time is not always accurate when compared to the hand dryer being used in realistic conditions. The ratings are based on the hand dryer being placed at its high speed setting if it can be manually adjusted.
Dry Speed (seconds):
- 10 – 11 seconds = star rating 5
- 12 – 13 seconds = star rating 4.5
- 14 – 15 seconds = star rating 4
- 16 – 17 seconds = star rating 3.5
- 18 – 19 seconds = star rating 3
- 20 – 21 seconds = star rating 2.5
- 22 – 23 seconds = star rating 2
- 24 – 25 seconds = star rating 1.5
- 26 – 27 seconds = star rating 1
- Over 28 seconds = star rating 0.5
-
Enhanced Hygiene3.0 out of 5
Hand dryers are a hygienic method of drying the hands. The better the dry, the less the risk of carrying germs on wet hands. Some hand dryers however have gone that little bit further to enhance the hygienic aspects of the hand dryer. These ratings are based on these extra factors that have been added to aid the hygienic properties. These ratings are based on an added together scoring system where the higher the rating the more enhanced the hygienic properties of the hand dryer. Cold Plasma Clean (CPC) is the most advanced hygienic property on the market and scores a maximum of 5 stars.
Enhanced Hygienic properties:
- Cold Plasm Clean Technology = score 5
- Fast dry (<15secs) = score 0.5
- Touch Free = score 0.5
- Heat Sanitation = score 0.5
- UV-C cleaning = score 0.5
- HEPA filter = score 1.5
- Anti Bacterial Coating = score 0.5
- General filter = score 0.5
- Ioniser = score 0.5
-
Vandal Resistance3.0 out of 5
Some hand dryers would not be suitable for some locations where abuse may be likely such as a train station or night club. However the same hand dryer would be suitable for an office or school location. These ratings are based on an added together scoring system where the higher the rating, the more suitable we would recommend for areas where abuse may be likely.
Vandal Resistance score
- Compact size = score 0.5
- Decreased blockage potential = score 0.5
- Additional Backplate/ fixings strength = score 1
- Anti-vandal extras = score 1
- Metal / ABS = score 1
- Cover thickness 1.5mm or more = score 0.5
- No leverage points (design) = score 0.5
- High speed dry times - 11 seconds at maximum settings (In-house tested dry times)
- Extremely energy efficient and low cost to run. At its lowest speed setting with no heat rated power is only 0.55kW; just 2.14Wh per dry, costing just 26p per 1000 dries. (3.79Wh per dry and 45p per 1000 dries at maximum settings 1.24kW)
- Effective water collection system – excess water ends up in a tray that is easily drained, drainage system easy to clean.
- 4 settings allow noise and energy levels to be customised to your own requirements. Change the speed of the motor and turn off the heater element at the flick of a couple of switches.
- The standard is 3 years manufacturers guarantee - we include a 5 years extended warranty if purchased here
- A very quiet hand dryer at its lowest speed setting when compared to other high speed dryers - manufacturer stated noise levels are just 56dbA at this setting – ‘Quite Mark’ approved
- Hygienic extras included for added peace of mind – anti bacterial resin injected into plastic and anti-microbial filter as standard (option to upgrade to a high quality HEPA equivalent).
- Dimensions are - W300 x H670 x D219
- It’s brushless motor means it is able to withstand extremely high daily traffic of over 500 users per day – over 1million cycles expected.
- CE, UL, cUL, Greenspec approved and ETL listed
- Available in white, silver or black ABS finishes
- IPX4
Review to follow.....
There are a few points to consider when choosing a hand dryer with disabled users in mind. These include:
- Wheelchair access with regard to users being able to position their hands correctly
- The amount of moisture that will be left on the floor after drying if units are to be used by people physically impaired
- The noise level of some high speed hand dryers may be too loud for some users, such as users with autism, multiple sclerosis etc.
Disabled areas often double up as baby changing facilities, so considerations include leaving extra space for double buggies, noise levels for children etc.
The Mitsubishi Jet Towel (heated) hand dryer has the following features that may negate these concerns:
- Quiet noise levels
- Water catchment tray to avoid water being dripped on to the floor
The Jet Towel 8th generation eco hand dryer has adjusted its design to make it easy for the Wheelchair bound and small children to use. An additional sensor has been added and the upper front panel has been lowered to allow the user to access and dry effectively by inserting their hands from the side.
Please note blade hand dryers are not the best option for young children or disabled users as hands under type dryers allow great flexibility of movement.
To view our full range of hand dryers with suitable properties for disabled users please click here
Not what you were looking for from a hand dryer? Have a look at our Intelligent Search Tool for a more personalised selection by clicking here
In our experience, the dry time stated by the manufacturer is not always the same in reality when used by the consumer. As experts in our field we like to show the types of variations we have found from independent testing and in house testing so that you have all relevant information before you purchase.
|
Mitsubishi Jet Towel (heated) |
Dry Speed |
|
Stated by Manufacturer* |
9 – 15 seconds |
|
Independent testing+ |
|
|
In house testing# |
11 - 14 seconds |
* As stated by the manufacturer using their own testing procedures
+ Please ask for more information
# Conducted using our own in house testing protocols (visual demonstration in “real use” as opposed to scientific protocols)
To view our full range of fast drying hand dryers please click here
Not what you were looking for from a hand dryer? Have a look at our Intelligent Search Tool for a more personalised selection by clicking here.
The energy efficiency of a hand dryer is derived by dividing the rated power by the dry speed. Ultimately what is important is how many watt-hours per dry are used.
|
Mitsubishi Jet Towel (heated) |
Rated Power |
Watt-hours per Dry |
|
Stated by Manufacturer* |
0.55kW – 1.24kW |
2.29Wh – 3.79Wh |
|
Independent testing+ |
N/A |
N/A |
|
In house testing# |
0.55kW - 1.24kW |
2.14Wh - 3.79Wh |
* As stated by the manufacturer using their own testing procedures
+ Please ask for more information
# Conducted using our own in house testing protocols (visual demonstration in “real use” as opposed to scientific protocols)
For comparison, a standard conventional hand dryer users around 25 – 30Wh per dry.
The above manufacturer rating range is based on their reported dry time of 11 seconds in Turbo mode with heat added to the airflow and the reported dry time of 15 seconds based on their unheated version (eco mode without heat only) which can be seen by clicking here. The inhouse testing dry times were found to be between 11 - 14 seconds.
To view our full range of our low energy hand dryers please click here.
Not what you were looking for from a hand dryer? Have a look at our Intelligent Search Tool for a more personalised selection by clicking here
So how much will it cost you to run this hand dryer?
The below figures are per 1000 dries, please see below regarding how to calculate a more personalised annual cost for you:
|
Mitsubishi Jet Towel (heated)* |
£0.26 - £0.45 |
|
Paper Towels+ |
£12.50 |
|
Standard warm air hand dryer*# |
£3 |
*Based on 12p per kW of electricity unit cost
+Based on 2.5 towels used per dry
#Standard warm air hand dryer use approx 25 watts per dry
Based on a 12p per kW of electricity unit cost, we would anticipate the Mitsubishi Jet Towel (heated) hand dryer would cost between approximately £0.000257 and £0.000455 per average drying cycle. These figures are based on the inhouse tested dry times of 14 seconds in Eco mode without heat and 11 seconds when the unit is at maximum settings (Turbo with heat).
To work out the annual running costs and carbon emissions in your facility for the Mitsubishi Jet Towel (heated) hand dryer click here – this will also show you annual savings made against putting paper towels, roller towels and standard warm air hand dryers into your facility.
Not what you were looking for from a hand dryer? Have a look at our Intelligent Search Tool for a more personalised selection by clicking here.
Depending upon the location, hand dryers can be damaged through vandalism. This includes being leveraged off the wall, damaging the outer casing and putting foreign objects into the openings. Locations this is likely to occur include pubs, nightclubs, transport facilities such as train stations, schools, stadiums, arenas and unattended public toilets to name a few.
The Mitsubishi Jet Towel has the following features to help reduce vandalism:
- Thick, strong back panel to help give strength of attachment to the wall
- Thick, impact resistant front panel
To view our full range of hand dryers with enhanced anti vandal features please click here
Not what you were looking for from a hand dryer? Have a look at our Intelligent Search Tool for a more personalised selection by clicking here
Please note, you will need to make sure you have fuse spurs installed which are suitable for hand dryers.
The Mitsubishi Jet Towel (heated) hand dryer has our install rating of:
* 3 *
1 = Easy, simple installation with no complicated considerations
2 = Easy, simple installation with a few considerations
3 = Moderately complex installation, with some considerations
4 = Slightly difficult, possibly complex installation with some complicated considerations
5 = Difficult, complex installation with complicated considerations
Please click hereto view the installation manual for Mitsubishi Jet Towel (heated) hand dryer.
Please note, our ratings above are our own for ease of comparison and are based on the assumption that a qualified electrician will be installing the hand dryer. We always recommend that a person of this calibre is commissioned to install for correct installation and health and safety requirements.
For more information regarding our install service please click here
Not what you were looking for from a hand dryer? Have a look at our Intelligent Search Tool for a more personalised selection by clicking here
We are passionate about helping others reduce carbon emissions, which in turn will help slow down the negative effects of global warming. For more information about carbon emissions and the environment click here
The following table shows the approx. amount of carbon emissions produced to complete 1000 dries
|
Mitsubishi Jet Towel (heated) |
2.05 Kg/CO2 per 1000 dries |
|
Paper Towels* |
22.5 Kg/CO2 per 1000 dries |
|
Standard warm air hand dryer+ |
13.5 Kg/CO2 per 1000 dries |
*Based on using 3 towels per dry
+Standard warm air hand dryer use approx 25 watts per dry
Paper towels are based on 22.5gms/Co2 per dry and standard warm air hand dryers are based on Carbon Trusts measurement of 1 kW = 0.54 kg/Co2.
To work out the annual running costs and carbon emissions in your facility for the Mitsubishi Jet Towel (heated) hand dryer click here – this will also show you how many virgin trees you will be saving by using this hand dryer compared to paper towels.
The above figures are based on the inhouse tested dry times of 11 seconds on maximum settings. As you will see this is still a very low carbon production when compared to paper towels or a standard warm air hand dryer. On eco settings without heat, at the inhouse tested dry time of 14 seconds, it would be anticipated that the carbon production would be 1.16 Kg/CO2 per 1000 dries.
We are seriously committed, as a Carbon Trust accredited supplier, to provide you with the most eco-friendly hand dryers available. Please click here to see more about what we do to help improve the environment and reduce carbon emissions.
Not what you were looking for from a hand dryer? Have a look at our Intelligent Search Tool for a more personalised selection by clicking here.
So how long will this dryer last?
Hand dryers can have 2 types of motor which are:
- A digital brushless motor
- A universal brush motor
In theory, universal brush motors do not last as long as digital brushless motors and require the brushes to be changed periodically. They also vary in their lifespan. Digital motors however do cost more to repair should they fail at any point. There are variations in the lifespans of both universal brushed motors and digital motors.
The best way to choose what is right for you is to look at your facility and the amount of use each hand dryer is expected to get. This way it can be determined if a brushed motor hand dryer would be most suitable for you or whether investing in a digital brushless motor would be more cost effective.
|
Type of motor in the Mitsubishi Jet Towel (heated) |
A digital brushless motor |
||||
|
Lifetime of brushes before needing replacing (if applicable) |
|
||||
|
Lifetime of the motor |
|
* Please note: the above is for guidance only based on generalised information relating to standard figures; each location and type of usage will effect each factor. With all high speed brush motors, they will last longer if the dust around moving parts is removed periodically.
The above information is based on the inhouse tested dry time of 11 seconds.
Based on the above information we would recommend this hand dryer to be situated in bathrooms with the following daily uses: (see recommendations with 'y') (non recommendations with 'n')
|
Low Traffic |
Light Traffic |
Medium Traffic |
Heavy Traffic |
Extreme Traffic |
|
<50 daily uses |
51 – 100 daily uses |
101 – 300 daily uses |
301 – 500 daily uses |
501> daily uses |
|
y |
y |
y |
y |
y |
To work out the annual life expectancy in your facility for the Mitsubishi Jet Towel (heated) hand dryer click here
To view our full range of long life expectancy hand dryers please click here
Not what you were looking for from a hand dryer? Have a look at our Intelligent Search Tool for a more personalised selection by clicking here.
Manufacturers typically measure sound levels in terms of decibels dB(A) @ a 1 metre distance in a sound proof chamber. This measurement does not take into account the increase in noise when hands are positioned under/in the dryer or when the sound bounces off walls. Where possible we supply manufacturer's stated dB(A), and 2 independent tests which are more reflective of 'real conditions’.
|
Manufacturer stated |
56 – 59 dB(A) |
|
Hands under in an anechoic chamber (sound proof) |
N/A |
|
Hands under in a normal room* |
N/A |
*represents maximum “real life” volume
Equivalent Examples:
Normal Conversation 50 - 70dB(A)
Vacuum Cleaner 70dB(A)
Busy Traffic / Alarm clock 80dB(A)
Lawn Mower / Chainsaw 90dB(A)
*various internet sources
Please click here to read our guide to help understand what the perceived decibel level above would be equivalent to.
The JetTowel has received the “Quiet Mark” status accolade.
As can be seen, the manufacturer stated noise level makes this hand dryer one of the quietest on the market, even at Turbo setting.
It is worth noting that each 10dbA rise in noise equates to a doubling in sound levels.
It is worth noting that if your noise concern relates to the noise carrying into different areas of the building then pitch will be just as relevant as sound output (loudness). Higher frequency pitches will not travel through walls as easily as low frequency pitches for example. Please contact usdirectly to discuss your specific need.
To view our full range of quiet hand dryers please click here
Not what you were looking for from a hand dryer? Have a look at our Intelligent Search Tool for a more personalised selection by clicking here.
Washing hands correctly is the best way to ensure high levels of hand hygiene. Making sure hands are completely dry is the next important aspect of hand hygiene.
Most modern hand dryers have standard hygienic properties such as fast dry times and touch free sensors to activate. However for added peace of mind some models have enhanced hygienic properties.
The extra hygiene aspects this hand dryer has are:
- Fast dry time
- Touch free sensors
- Has an antibacterial resin inserted into all plastic parts
- Has an anti-microbial filter fitted (not HEPA)
- An optional high grade filter can be purchased which is a HEPA equivalent
The Jet Towel also has a removable side panel to the drip tank which, in the unlikely event of a blockage, makes it a lot easier to remove the obstruction. It also allows deeper cleaning of this area.
To view our full range of hand dryers with extra hygienic properties please click here – this includes our eXtremeAir CPC model with Cold Plasma technology.
Not what you were looking for from a hand dryer? Have a look at our Intelligent Search Tool for a more personalised selection by clicking here
At Intelligent Hand Dryers UK, our ethos is to bring you as much open, honest and reliable information as possible so you can make the most suitable and informed purchase.
We endeavour to include independently obtained results and in house testing, as well as manufacturer's specifications. This gives a true reflection of dry time performance, noise and energy efficiency of each hand dryer.
Noise level testing was conducted at the Building Research Establishment (BRE) and a leading independent testing facility.
We also provide in house video testing to demonstrate dry performance. This gives a visual demonstration in “real use” as opposed to using methodical scientific protocols. The approximate dry time using this method was set when no spots of water could be seen on a paper towel after drying the hands. This is over and above what is required to be classed as a “hygienic dry” which requires 95% of the hands to be dry after using the dryer.
Need more information or advice? Please contact us by clicking here where one of our dedicated experts will be able to assist you in whichever way you need.
| Energy Consumption | Electrical Supply Voltage | 220-240 Volts |
| Electrical Supply Frequency | 50/60 Hz | |
| Standby Power Consumption | 1 Watts | |
| Performance | Expected Motor Life | 5000 Hours |
| Dry Time (max setting) | 11 Seconds | |
| Dry Time (min setting) | 14 Seconds | |
| Dry Time Notes | In-house tested dry times | |
| Digital Brushless Motor | ||
| Air Speed (max setting) | 237 MPH | |
| Air Speed (min setting) | 219 MPH | |
| Heater Element Power | 520 Watts | |
| Motor Cutoff Time | 30 Seconds | |
| Rated Power | Rated Power (max settings) | 1240 Watts |
| Rated Power (min settings) | 550 Watts | |
| Energy Per Dry (max setting) | 3.79 Watt-hours (Wh) | |
| Energy Per Dry (min setting) | 2.14 Watt-hours (Wh) | |
| Energy Per Dry Notes | Based on In-house tested dry times | |
| Noise | Operating Sound Level (max setting) | 59 dB |
| Operating Sound Level (min setting) | 56 dB | |
| Sensor | Sensor type | IR |
| Guarantee | 5 Years | |
| Inc. Parts | ||
| Inc. Labour | ||
| Construction | Materials | Polypropylene ABS Anti-microbial material |
| Net Weight | 11 kg | |
| Finishes | White ABS | |
| Grey / Silver ABS | ||
| Other Finishes | Black ABS | |
| Electrical & Safety | IP rating | IPX4 |
| Dimensions | Product Height | 670 mm |
| Product Width | 300 mm | |
| Product Depth | 219 mm | |
| Packaging Height | 810 mm | |
| Packaging Width | 400 mm | |
| Packaging Depth | 260 mm | |
| Mounting Instructions | Men | 925 mm |
| Women | 905 mm | |
| Children 4-7 Years | 865 - 915 mm | |
| Children 7-10 Years | 865 - 915 mm | |
| Children 10-13 Years | 865 - 915 mm | |
| Children 13-17 Years | 865 - 915 mm | |
| Disabled | 865 - 915 mm | |
| Certification | CE | |
| CUL | ||
| UL | ||
| Other | Greenspec, Quiet mark, ETL listed | |
| General | General Notes |
RIBA Architect classification N13-472 hand driers/hand dryers Type: high velocity air dryer Manufacturer: Mitsubishi Product reference: Jet Towel JT-SB216JSH2-S-NE Operation: automatically activated Power rating: 1240W Enclosure: Polypropylene ABS Anti-microbial material Colour: Silver Fixing arrangement: Wall mounted with rear entry cabling Electrical supply: Fused spur. |
Here is a list of spares and accessories available for the Mitsubishi Jet Towel Slim.
If you do not see the specific part you are looking for, please contact us.
| Spare Part or Accessory | Part Code | Link to Product |
| High Grade Hand Dryer Filters (Pack of 3 pieces + Cartridge) | JP-FS1-E | Please click here |
Excellent service and prompt delivery. With that and good prices what's not to like.
